Your home's electrical system works around the clock -- powering lights, appliances, HVAC, and electronics every day. Over time, connections loosen, breakers wear, and wiring degrades. Preventive maintenance catches these issues before they cause outages, equipment damage, or fire hazards. Power Man Electric provides annual electrical maintenance for homes throughout Murrieta, Temecula, and the Inland Empire.
Our maintenance service includes panel inspection, connection torquing, GFCI testing, smoke detector verification, and surge protection assessment. Preventive maintenance reduces overall repair costs by approximately 30% and extends the lifespan of your electrical system. Every visit is performed by a licensed C-10 electrician.
We open the panel, inspect all breakers and bus bar connections for signs of overheating or corrosion, and torque every connection to manufacturer specifications. Loose connections are a leading cause of electrical fires.
We test outlets for proper voltage, polarity, and grounding. Every GFCI outlet is trip-tested to verify it can disconnect power within the required 25-millisecond response time.
We test all smoke detectors and carbon monoxide detectors for proper function, verify they are hardwired with battery backup per California code, and replace batteries as needed.
If you have a whole-house surge protector, we verify it is functional and has not reached end-of-life. If you do not have one, we recommend and can install a surge protective device during the visit.
We inspect accessible wiring in attics, garages, crawl spaces, and utility areas for damage, deterioration, improper splices, and pest damage that could cause shorts or fires.
You receive a written report documenting the condition of your electrical system, any issues found, and prioritized recommendations for repairs or upgrades.
Preventive maintenance is one of the most cost-effective investments for your home. These ranges are based on current California market data.
| Service | Cost Range | Details |
|---|---|---|
| Annual Maintenance Visit | $150 - $300 | Full panel inspection, torquing, GFCI test, written report |
| Whole-House Surge Protector | $200 - $800 | Type 2 SPD installed at panel, device + labor included |
| Smoke Detector Replacement | $100 - $200 each | Hardwired with battery backup, per California code |
| GFCI Outlet Replacement | $100 - $200 each | Replace failed GFCI outlets found during testing |
| Panel Connection Tightening | Included | Torquing all panel connections to spec, included in visit |
| Infrared Thermal Scan | $150 - $350 | Thermal camera scan to detect hidden hot spots |
Call (951) 704-5067 or book online. We schedule a convenient time and ask about your home's age, any known electrical concerns, and whether you have a surge protector installed.
Our licensed electrician opens the panel, inspects all breakers and connections, and torques every termination to manufacturer specifications. We check for overheating, corrosion, and any signs of developing problems.
We test every GFCI outlet, check all smoke and CO detectors, verify surge protector status, and spot-check outlets for voltage, polarity, and grounding. Any failed devices are reported and can be replaced during the visit.
We inspect accessible wiring in the attic, garage, crawl spaces, and utility areas for physical damage, pest damage, deterioration, and improper splices or connections.
You receive a written condition report documenting everything inspected, any issues found, and prioritized recommendations. We walk you through the findings and answer all your questions before leaving.
Panel maintenance requires opening the electrical panel and working with energized components. Our licensed C-10 electricians have the training and insurance to perform this work safely and correctly.
Preventive maintenance catches small issues before they become expensive emergencies. One tightened connection can prevent an overheated wire, a failed breaker, or a house fire.
Flat-rate annual maintenance visits with no hidden charges. Additional repairs discovered during the visit are quoted separately and only performed with your approval.
We install whole-house surge protectors from Eaton, Siemens, and Leviton that protect your entire home's electronics and appliances. Required by the 2026 California Electrical Code for new services.
New customers receive 15% off their first maintenance visit. We also offer special discounts for seniors and veterans in the Murrieta and Temecula area.
32 five-star reviews and counting. We provide honest assessments and never recommend unnecessary work. Your safety and satisfaction are our priority.
"Power Man Electric did an annual maintenance check on our 15-year-old home. They found several loose connections in the panel and two GFCI outlets that had failed silently -- we had no idea they were not protecting us. They tightened everything, replaced the failed GFCIs, and installed a whole-house surge protector. Great preventive care that gives us peace of mind."
-- Tom & Linda P., Temecula, CA
An annual electrical maintenance visit in Murrieta typically costs $150 to $300, covering a full panel inspection, connection tightening, GFCI testing, smoke detector check, and a written condition report. Adding a whole-house surge protector costs an additional $200 to $800 installed. Preventive maintenance reduces overall repair costs by approximately 30%.
We recommend annual electrical maintenance for all homes. Homes over 25 years old, homes with aluminum wiring, and homes with high-demand equipment (EV chargers, home offices, pools, hot tubs) benefit from twice-yearly checkups. Annual maintenance catches deteriorating connections and developing problems before they cause outages or fire hazards.
Yes. A whole-house surge protector costs $200 to $800 installed and protects all electronics, appliances, and HVAC equipment from voltage spikes. The 2026 California Electrical Code requires surge protective devices for all new dwelling unit services. Even for existing homes, it is one of the most cost-effective ways to protect thousands of dollars in equipment.
Our annual visit includes panel inspection and connection torquing, GFCI outlet trip testing, smoke and CO detector verification, surge protector status check, outlet spot-checks for voltage and grounding, visible wiring inspection, and a written condition report with recommendations. Any repairs found can be quoted and completed during the same visit.
Yes. Electrical failures are a leading cause of home fires. Many are caused by loose connections, deteriorated wiring, and failed breakers -- all conditions detectable through routine maintenance. Tightening panel connections, testing breaker function, and verifying AFCI protection are direct fire prevention measures included in our annual service.
We provide electrical maintenance services throughout Southwest Riverside County and the Inland Empire.